How to mount USB drive in ubuntu (Proxmox LXC) - shows up in lsusb but getting error special device does not exist | pressku.com

I'm trying to link a USB thrust to a Ubuntu instrumentality via Proxmox. I'm a full linux/Proxmox newbie truthful apologies if I opportunity thing incorrectly. I've pieced together tons of ways to equine nan thrust from various posts, and here's wherever I'm astatine truthful acold (and stuck).

If I cheque lsusb I tin spot nan drive:

Bus 003 Device 006: ID 04e8:4001 Samsung Electronics Co., Ltd PSSD T7

if I tally lsblk I spot nan thrust arsenic sda/sda1:

NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 1.8T 0 disk `-sda1 8:1 0 1.8T 0 portion

I created a files to equine nan thrust successful and past effort to nexus it:

sudo equine /dev/sda/sda1 /mnt/USBSSD but I get an error:

mount: /mnt/USBSSD: typical instrumentality /dev/sda1 does not exist.

I've tried aggregate permutations of /dev/sda, /dev/sda1, etc, but nan instrumentality does not beryllium persists. If I cheque nan contents of nan /dev files I see:

console afloat log null random stderr tty ttyACM0 ttyUSB1 core hugepages lxc ptmx serial stdin tty1 ttyACM1 urandom fd initctl mqueue pts shm stdout tty2 ttyUSB0 zero

I besides checked dsmeg aft inserting nan thrust and get nan pursuing output:

[75761.260009] sd 3:0:0:0: [sda] Synchronizing SCSI cache [75761.500002] sd 3:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [75766.539828] usb 3-5: caller high-speed USB instrumentality number 6 utilizing xhci_hcd [75766.690181] usb 3-5: New USB instrumentality found, idVendor=04e8, idProduct=4001, bcdDevice= 1.00 [75766.690185] usb 3-5: New USB instrumentality strings: Mfr=2, Product=3, SerialNumber=1 [75766.690186] usb 3-5: Product: PSSD T7 [75766.690186] usb 3-5: Manufacturer: Samsung [75766.690187] usb 3-5: SerialNumber: S6XGNS0TB18431D [75766.705228] scsi host2: uas [75766.705728] scsi 2:0:0:0: Direct-Access Samsung PSSD T7 0 PQ: 0 ANSI: 6 [75766.707646] sd 2:0:0:0: Attached scsi generic sg0 type 0 [75766.707832] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [75766.707961] sd 2:0:0:0: [sda] Write Protect is off [75766.707962] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00 [75766.708198] sd 2:0:0:0: [sda] Write cache: enabled, publication cache: enabled, doesn't support DPO aliases FUA [75766.708279] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [75766.708281] sd 2:0:0:0: [sda] Optimal transportation size 33553920 bytes [75766.709990] sda: sda1 [75766.710148] sd 2:0:0:0: [sda] Attached SCSI disk

Any proposal connected really to get nan thrust to mount? Thanks!